Advantech PCA-6185 Manual Do Utilizador

To access the SCSI disk utilities, follow these steps:
1.

Select the SCSI Disk Utilities option from the menu that appears 
after starting SCSISelect. SCSISelect scans the SCSI bus (to deter-
mine the devices installed) and displays a list of all SCSI IDs and 
the devices assigned to each ID.

2.

Use the arrow keys to move the cursor to a specific ID and device, 
then press Enter.

3.

A small menu appears, displaying the options Format Disk and Ver-
ify Disk Media.

•  Format Disk—Allows you to perform a low-level format on a hard 
disk drive. Most SCSI disk devices are preformatted at the factory and do 
not need to be formatted again.

•  Verify Disk Media—Allows you to scan the media of a hard disk drive 
for defects. If the utility finds bad blocks on the media, it prompts you to 
reassign them; if you select yes, those blocks are no longer used. Pressing 
Esc at any time aborts the utility.

If you are only using SCSI hard drives without any IDE HDD drive 
installed, please follow these steps:
1.

Insert Windows NT/Windows 2000 CD Disk.

2.

Press F6 immediately when it displays: “Set up is inspecting your 
computer’s hardware configuration.”

3.

Then it enter SCSI installation. Please insert SCSI driver floppy 
disk.