Advantech PCA-6185 用户手册
77
Chapter 7
7.8 Using SCSI Disk Utilities
To access the SCSI disk utilities, follow these steps:
1.
1.
Select the SCSI Disk Utilities option from the menu that appears
after starting SCSISelect. SCSISelect scans the SCSI bus (to deter-
mine the devices installed) and displays a list of all SCSI IDs and
the devices assigned to each ID.
after starting SCSISelect. SCSISelect scans the SCSI bus (to deter-
mine the devices installed) and displays a list of all SCSI IDs and
the devices assigned to each ID.
2.
Use the arrow keys to move the cursor to a specific ID and device,
then press Enter.
then press Enter.
3.
A small menu appears, displaying the options Format Disk and Ver-
ify Disk Media.
ify Disk Media.
• Format Disk—Allows you to perform a low-level format on a hard
disk drive. Most SCSI disk devices are preformatted at the factory and do
not need to be formatted again.
disk drive. Most SCSI disk devices are preformatted at the factory and do
not need to be formatted again.
Caution: A low-level format destroys all data on the drive. Be
sure to back up your data before performing this
operation. You cannot abort a low-level format once it
is started.
• Verify Disk Media—Allows you to scan the media of a hard disk drive
for defects. If the utility finds bad blocks on the media, it prompts you to
reassign them; if you select yes, those blocks are no longer used. Pressing
Esc at any time aborts the utility.
for defects. If the utility finds bad blocks on the media, it prompts you to
reassign them; if you select yes, those blocks are no longer used. Pressing
Esc at any time aborts the utility.
7.9 Installation under Windows NT/Windows 2000
If you are only using SCSI hard drives without any IDE HDD drive
installed, please follow these steps:
1.
installed, please follow these steps:
1.
Insert Windows NT/Windows 2000 CD Disk.
2.
Press F6 immediately when it displays: “Set up is inspecting your
computer’s hardware configuration.”
computer’s hardware configuration.”
3.
Then it enter SCSI installation. Please insert SCSI driver floppy
disk.
disk.