Symmetricom 1100 Manual Do Utilizador

Chapter 4 Provisioning the TimeProvider

Additional NTP commands are described in the TimeProvider TL1 Reference Guide.

You use the ACT-FEATURE command to enable the NTP feature on the 
TimeProvider. You should contact your Symmetricom Sales representative and 
order part number 920-58000-01 to obtain the key to activate the NTP feature.

ACT-FEATURE:[<tid>]:<fid>:[<ctag>]::<key>;

This command has a default access level of ADMIN.

ACT-FEATURE::NTP:TS1000::”ABcdEFgh123456”;

This command enables the NTP feature within the TimeProvider, and uses an 
activation code provided by Symmetricom.

TP-SSU 03-05-15 09-59-09

M 1166 COMPLD

“IMC Serial#=ABC123”

“NTP activated”

;

TP-SSU 03-05-15 09-59-09

A 1166 REPT EVT EQPT

“IMC,EQPT:FEATURE,TC,03-05-15 09-59-09,,,,:\”System 

Feature has been enabled\””

;

You use the ED-EQPT command to edit the NTP peer server parameters after the 
NTP function is activated. When you set the <func> value to ADD or DELETE, you 
must include the <keyid>, <minpoll>, <maxpoll> and <preferred> values.

ED-EQPT:[<tid>]:NTP:[<ctag>]::SERVER,<func>,<serverIP>, 

[<keyid>,<minpoll>,<maxpoll>,<preferred>];

<fid>

NTP

The feature to be enabled.

<key>

Up to 20 case-sensitive characters; must 
be within quotes to be case-sensitive.

Key to enable the feature