Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netgear
  4. FVS318N
  5. Manual Do Utilizador

Netgear FVS318N Manual Do Utilizador

Download
Página de 425
LAN Configuration
100
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N 
To edit an IPv4 static route:
1. 
On the Static Routing screen for IPv4 (see 
 on page 98), click the Edit button 
in the Action column for the route that you want to modify. The Edit Static Route screen 
displays. This screen is identical to the Add Static Route screen (see the previous 
figure).
2. 
Modify the settings as explained in the previous table.
3. 
Click Apply to save your settings.
To delete one or more routes:
1. 
On the Static Routing screen for IPv4 (see 
 on page 98), select the check box 
to the left of each route that you want to delete, or click the Select All table button to 
select all routes.
2. 
Click the Delete table button.
Configure the Routing Information Protocol
Routing Information Protocol (RIP), RFC 2453, is an Interior Gateway Protocol (IGP) that is 
commonly used in internal IPv4 networks (LANs). RIP enables a router to exchange its 
routing information automatically with other routers, to dynamically adjust its routing tables, 
and to adapt to changes in the network. RIP is disabled by default. RIP does not apply to 
IPv6.
To enable and configure RIP:
1. 
Select Network Configuration > Routing. In the upper right of the screen, the IPv4 
radio button is selected by default. The Static Routing screen displays the IPv4 settings 
(see 
2. 
Click the RIP Configuration option arrow to the right of the Static Routing submenu tab. The 
RIP Configuration screen displays. (The following figure contains some examples.)