Netgear FVS318N Manual Do Utilizador

Click Apply to save your settings.

RIP Version

By default, the RIP version is set to Disabled. From the RIP Version drop-down list, 
select the version:

• RIP-1. Classful routing that does not include subnet information. This is the most 

commonly supported version. 

• RIP-2. Routing that supports subnet information. Both RIP-2B and RIP-2M send 

the routing data in RIP-2 format: 

- RIP-2B. Sends the routing data in RIP-2 format and uses subnet 

broadcasting.

- RIP-2M. Sends the routing data in RIP-2 format and uses multicasting. 

Authentication for

 

RIP-2B/2M required?

Authentication for RP-2B or RIP-2M is disabled by default, that is, the No radio 
button is selected. To enable authentication for RP-2B or RIP-2M, select the Yes 
radio button, and enter the settings for the following fields.

First Key Parameters

MD5 Key Id

The identifier for the key that is used for authentication.

MD5 Auth Key

The password that is used for MD5 authentication.

Not Valid Before

The beginning of the lifetime of the MD5 key. Enter the month, 
date, year, hour, minute, and second. Before this date and 
time, the MD5 key is not valid.

Not Valid After

The end of the lifetime of the MD5 key. Enter the month, date, 
year, hour, minute, and second. After this date and time, the 
MD5 key is no longer valid.

Second Key Parameters

MD5 Key Id

The identifier for the key that is used for authentication.

MD5 Auth Key

The password that is used for MD5 authentication.

Not Valid Before

The beginning of the lifetime of the MD5 key. Enter the month, 
date, year, hour, minute, and second. Before this date and 
time, the MD5 key is not valid.

Not Valid After

The end of the lifetime of the MD5 key. Enter the month, date, 
year, hour, minute, and second. After this date and time, the 
MD5 key is no longer valid.