Avaya Comcode 700220627 Manual Do Utilizador

After migrating the customer’s data, you should verify that the disks have resynchronized 
successfully before leaving the site.

To check the status of the disk drives:

1. Enter:

2. Enter:

The system should not display anything except the command prompt.

If any lines display 

MX

 or 

NX

, the disk requires maintenance. Escalate through normal 

channels.

If one or more lines display with 

PD

 or 

MR

, the disks either need resyncing or are 

currently resyncing. If any disks are still resyncing, you should continue to check the 
system and run the 

 command to verify that the disks are in a stable state.

After migrating the customer’s data, remove the tapes from the tape drives, and replace 
any tapes that the customer originally had in the tape drives. These tapes may be used for 
scheduled backups and must be replaced before leaving the customer site.