Avaya 12 Manual Do Utilizador

8. Press Enter to accept the default value.

The following messages are displayed:

!

!

Important:

Enter: y

The following message is displayed:

9. Press Enter to accept the default value.

The following messages are displayed:

10. Press Enter to accept the default value.

The system begins to boot up. Note that during boot-up, you might see error messages 
concerning hardware for which software is not yet installed. This will be corrected later 
in the upgrade procedure when the extracted customer options are installed.

Note:

If the boot fails, turn off the power to the computer and check all device 
cables. Cycle power on all external devices. Start again with Step 1.

11. After the system reboots, log in as root.

12. If prompted for a password, press Enter. (At this point in the upgrade, there is no 

password.)

13. Enter:

Note the new CMS load and make sure that it matches the expected upgrade load.

14. Continue with 

SunOS Release 5.9 Version Generic_xxxxxx-xx 64-bit

Copyright 1983-2003, Sun Microsystems, Inc. All rights reserved.

Use is subject to license terms.

-

The /etc/path_to_inst on your system does not exist or is empty.

Do you want to rebuild this file [n]?

root filesystem type [ufs]:

Enter physical name of root device

[/sbus@X,0/SUNW,socal@d,10000/sf@0,0/ssd@w<WWN>,0:a]: