Chief Manufacturing MSP-DUK9000 Manual Do Utilizador
Instruction Manual
MSP-DUK9000
9
SECURITY INSTALLATION
(OPTIONAL)
1.
Using security wrench (provided), remove 5/16” standard set-
screw and replace using 5/16” security screw (see Figure 8).
screw and replace using 5/16” security screw (see Figure 8).
2.
Remove two screws from bottom of Projector Interface Plate,
preferably one from each corner.
preferably one from each corner.
3.
Using security wrench and security screws from All-Points
Security package, secure Projector Interface Plate to projector.
Security package, secure Projector Interface Plate to projector.
4.
Using security wrench (provided), replace screws in Projector
Interface Plate with undercut security screws from top from top
plate.
Interface Plate with undercut security screws from top from top
plate.
5.
Remove two 1/4-20 x .5” round head carriage bolts and 1/4-20
acorn nut caps and replace using two security screws and lock
nut Nylocks (see Figure 8).
acorn nut caps and replace using two security screws and lock
nut Nylocks (see Figure 8).
Figure 8. Adding Optional Security