Chief Manufacturing MSP-DUK9000 Manual Do Utilizador
6
Instruction Manual
MSP-DUK9000
Standard Fasteners Secured to a Wood Framing Member
The Universal Ceiling Projector Mount can be secured to a wood
framing member through four slotted holes in the Universal Ceiling
Projector Mount using four 1/4” diameter lag screws or, if the area
is accessible from above, four 1/4” diameter machine bolts, nuts,
and washers. Install the Universal Ceiling Projector Mount as fol-
lows:
framing member through four slotted holes in the Universal Ceiling
Projector Mount using four 1/4” diameter lag screws or, if the area
is accessible from above, four 1/4” diameter machine bolts, nuts,
and washers. Install the Universal Ceiling Projector Mount as fol-
lows:
1.
Secure the Universal Ceiling Projector Mount to the wood
framing member.
framing member.
2.
Proceed to “PROJECTOR INTERFACE PLATE ATTACH-
MENT PROCEDURES” on page 7.
MENT PROCEDURES” on page 7.
Threaded Rod
Using four 1/4” diameter threaded rods, the Universal Ceiling Pro-
jector Mount can be secured to a typical unistrut, angle or channel
assembly at the overhead structural members (trusses or I-beams)
(see Figure 4). Install the Universal Ceiling Projector Mount as fol-
lows:
jector Mount can be secured to a typical unistrut, angle or channel
assembly at the overhead structural members (trusses or I-beams)
(see Figure 4). Install the Universal Ceiling Projector Mount as fol-
lows:
1.
Secure one end of the threaded rod to the structural member.
2.
Install a 1/4-20 hex nut on each threaded rod.
3.
Install the Universal Ceiling Projector Mount on the threaded
rod.
rod.
NOTE: Holes in the Universal Ceiling Projector Mount allow
socket wrench access without unit disassembly.
socket wrench access without unit disassembly.
4.
Secure the Universal Ceiling Projector Mount to the threaded
rod using eight 1/4-20 hex nuts.
rod using eight 1/4-20 hex nuts.
Figure 4. 1/4”Threaded Rod
Joist
(8) 1/4" Hex Nut
(4) 1/4" Threaded Rod
Backing
Block
Block
Universal
Projector
Mount
Projector
Mount
(8) 1/4" Flat Washer
(8) 1/4-20 HEX NUT
(8) 1/4" Flat Washer
Joist
Backing Block
(4) 1/4" Hex Nut
(8) 1/4" Washer
(4) 1/4" Grade 5 Bolt
Universal
Projector Mount
Projector Mount