Cisco Systems 612 Manual Do Utilizador

Página de 108
 
1-11
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
OL-9137-02
Chapter 1      Introducing the Cisco Wide Area Application Engine
  Hardware Features
Note
The system software does not support the use of a keyboard or mouse (Personal 
System 2 [PS/2] or Universal Serial Bus [USB]). However, keyboard and mouse 
are supported by the BIOS for power-on self-test (POST), and the 
configuration/setup utility.
 describes the back panel ports and receptacles. 
Ethernet Port Connector
The WAE appliance comes with one integrated dual-port Ethernet controller. This 
controller provides an interface for connecting to 10-Mbps, 100-Mbps, or 
1000-Mbps networks and provides full-duplex (FDX) capability, which enables 
simultaneous transmission and reception of data on the Ethernet LAN.
Table 1-4
Back Panel Ports and Connectors 
Item
Description
AC power receptacle
The AC power cord connects to this plug.
Ethernet 1 port
This 10/100/1000BASE-T port is autosensing with 
full-duplex capability; it connects your device to the 
Ethernet LAN.
Ethernet 2 port
This 10/100/1000BASE-T port is autosensing with 
full-duplex capability; it connects your device to the 
Ethernet LAN.
Serial port
This is a standard serial port for connecting to a 
console or terminal.
Audio/video port (on 
optional MPEG A/V 
decoder adapter)
  •
3 BNC
1
 connectors for YUV, RGB
2
, and 
composite video output
  •
Mini-XLR 8-pin connector for S/PDIF
3
 and 
analog stereo audio output
  •
Mini-XLR 8-pin connector for VGA
4
 output
1.
BNC = Bayonet Neill-Concelman
2.
RGB = red green blue
3.
S/PDIF = Sony/Philips Digital Interface
4.
VGA = video graphics array