Cisco Systems 612 Manual Do Utilizador
Chapter 1 Introducing the Cisco Wide Area Application Engine
Hardware Features
1-12
Cisco Wide Area Application Engine 512 and 612 Hardware Installation Guide
OL-9137-02
To access the Ethernet port, connect a Category 3, 4, or 5 unshielded twisted-pair
(UTP) cable to the RJ-45 connector on the back of the device.
(UTP) cable to the RJ-45 connector on the back of the device.
Note
The 100BASE-TX/1000BASE-TX Ethernet standard requires that the cabling in
the network be Category 5 or higher.
the network be Category 5 or higher.
shows the pin number assignments for the Ethernet RJ-45 port.
Figure 1-8
Ethernet Port Connector
Serial Port Connector
The WAE appliance has one standard serial port connector located on the back of
the device.
the device.
shows the pin number assignments for the 9-pin, male D-shell serial
port connector on the back of the device. These pin number assignments conform
to the industry standard for RS-232 communications.
to the industry standard for RS-232 communications.
Figure 1-9
Serial Port Connector
1
8
Link LED
(green)
Activity LED
(green)
83195
1
5
6
9
83193