Boca Research 10/100 Manual Do Utilizador

EtherFast

®

10/100 LAN Cards

43

7. Add the LOAD and BIND statements to your server's AUTOEXEC.NCF

file so that the LAN driver loads automatically each time your server is
started up.

1.  On the PC in which you installed the EtherFast card, simultaneously press

CTRL and ESC.

2.  When the next screen pops up, select the number for System Console

and press Enter.

3.  In the System Console prompt, load NWCONFIG by typing 

nwconfig

and hitting Enter.

4.  Highlight Driver Options. Press Enter.

5. Highlight 

Configure network drivers. Press Enter.

6. Highlight 

Select a driver. Press Enter.

7. Press 

INS to Install an unlisted driver.

8. Press 

F3 to Specify a different path.

9. In 

the 

Specify a directory path box, type 

A:\NETWARE\SERVER\NW50

and press Enter.

10. In the next box, ensure that LNE100TX.LAN | Linksys LNE100TX Fast

Ethernet Driver is highlighted. Press Enter.

11. You will be asked Do you want to copy driver LNE100TX.LAN. Highlight

Yes, then press Enter.

12. Files will begin copying to your hard drive. Afterwards, a Protocol and

Parameter screen will pop up. Highlight Select/Modify driver parame-
ters and protocol. Press Enter.

13. Arrow down the list that appears and choose which protocols you want to

install. Press F10 to save.

LNE100TX v4 test doc.qxd  3/22/00  4:14 PM  Page 43