Sony STRDG720 Manual Do Utilizador

 

 

You can use the AUDIO menu to make 
settings for the audio to suit your preference.
Select “5-AUDIO” in the amplifier menus. For 
details on adjusting the parameters, see 
“Navigating through menus” (page 37) and 
“Overview of the menus” (page 38).

x DEC. PRI. (Digital audio input 

Lets you specify the input mode for the digital 
signal input to the DIGITAL IN and HDMI IN 
jacks.
• DEC.  PCM

When signals from the DIGITAL IN jack are 
selected, PCM signals are given priority (to 
prevent interruption when playback starts).

 

However, when other signals are input, there 
may be no sound, depending on the format. 
In this case, set this item to “DEC. AUTO”. 
When signals from the HDMI IN jack are 
selected, only PCM signals are output from 
the connected player. When signals in any 
other format are received, set this item to 
“DEC. AUTO”.

• DEC.  AUTO

Automatically switches the input mode 
between DTS, Dolby Digital, or PCM.

When set to “DEC. AUTO” and the sound from the 
digital audio jacks (for a CD, etc.) is interrupted 
when playback starts, set to “DEC. PCM”.

x DUAL (Digital broadcast 

Lets you select the language you want to listen 
to during digital broadcast. This feature only 
functions for Dolby Digital sources.
• DUAL M/S (Main/Sub)

Sound of the main language will be output 
through the front left speaker and sound of 
the sub language will be output through the 
front right speaker simultaneously.

• DUAL  M  (Main)

Sound of the main language will be output.

• DUAL  S  (Sub)

Sound of the sub language will be output.

• DUAL M+S (Main + Sub)

Mixed sound of both the main and sub 
languages will be output.

x A.V. SYNC. (Synchronizes audio 

• A.V.SYNC. N (No) (Delay time: 0 ms)

The audio output is not delayed.

• A.V.SYNC. Y (Yes) (Delay time: 60 ms)

The audio output is delayed so that the time 
gap between the audio output and visual 
display is minimized.

• This parameter is useful when you use a large LCD 

or plasma TV or a projector.

• This parameter is valid only when you use a sound 

field selected with the 2CH or A.F.D. buttons.

• This parameter is not valid when

– signals with a sampling frequency of more than 

48 kHz is input.

– the multi channel Linear PCM signals are 

received via an HDMI IN jack.

– ANALOG DIRECT function is selected.

x D. ASSIGN

 

Lets you assign the digital audio input to other 
input source. For details, see “Listening to 
digital sound from other inputs (DIGITAL 
ASSIGN)” (page 68).

x NAME IN (Naming inputs)

Lets you set the name of inputs. For details, 
see “Naming inputs” (page 71).