Sony STRDG720 Manual Do Utilizador

You can use the VIDEO menu to make various 
adjustments for HDMI and to name inputs.
Select “6-VIDEO” in the amplifier menus. For 
details on adjusting the parameters, see 
“Navigating through menus” (page 37) and 
“Overview of the menus” (page 38).

x AUDIO FOR HDMI (Audio for 

Lets you set the audio output for HDMI from 
the playback component connected to the 
receiver via an HDMI connection.
• AMP

The HDMI audio signals from the playback 
component is only output to speakers 
connected to the receiver. Multi-channel 
sound can be played back as it is.

Audio signals are not output from the TV’s 
speakers when “AUDIO FOR HDMI” is set to 
“AMP”.

• TV+AMP

The sound is output from TV’s speaker and 
the speakers connected to the receiver.

• The sound quality of the playback component 

depends on the TV’s sound quality, such as the 
number of channels, and the sampling 
frequency, etc. When the TV has stereo 
speakers, the sound output from the receiver is 
also stereo as that of the TV, even if you play 
back multi-channel source.

• When you connect the receiver to a video 

component (projector, etc.), sound may not be 
output from the receiver. In this case, select 
“AMP”.

x CONTROL FOR HDMI (Control 

Lets you turn the Control for HDMI function 
on or off. For details, see “Control for HDMI” 
(page 62).

x NAME IN (Naming inputs)

Lets you set the name of inputs. For details, see 
“Naming inputs” (page 71).