Omega Vehicle Security 1500 Manual Do Utilizador
NetScan User’s Manual
General Information and Specifications 3-5
Scan Interval:
•
•
Absolute time between scans (
hh:mm:ss.t
); min = 00:00:00.0,
max = 99:59:59.9. Note: Specifying a value of 00:00:00.0 results in no delay
between channel scans.
between channel scans.
Triggers
Installation Category:
•
•
CE: Category 1.
Programmable Triggering:
•
•
Temperature or Voltage level (above or below), absolute time of day, alarm
condition (on or off), external TTL trigger (rising or falling), specified
number of readings.
condition (on or off), external TTL trigger (rising or falling), specified
number of readings.
Temperature-Level Trigger:
•
•
Programmable value for any one channel. Not available in Burst mode.
TTL Trigger:
•
•
Programmable for rising or falling edges.
Pre-Trigger Count and Post-Trigger Count:
•
•
Programmable integer (< memory size -1); and programmable integer..
Digital Filtering:
•
•
Average 16 samples at 50/60 Hz for line cycle noise.
TC Reference:
•
•
TC reference tables based on the IPTS-68 standard as listed with the US
Department of Commerce (NTIS). International Electrotechnical
Commission (IEC) 43 760.
Department of Commerce (NTIS). International Electrotechnical
Commission (IEC) 43 760.
Trigger Input Connector:
External BNC connector
Trigger Output Connector:
External BNC connector
Data Storage & Format
Storage:
•
•
128 K reading (256 Kbyte) standard; optional 500 K reading (1 Mbyte),
2 M reading (4 Mbyte), 4 M reading (8 Mbyte).
2 M reading (4 Mbyte), 4 M reading (8 Mbyte).
Data Formats:
•
•
ASCII and binary; binary format returns a 16-bit compensated and linearized
temperature value (0.1°C/bit); user-programmable for hi/low byte or low/hi
byte.
temperature value (0.1°C/bit); user-programmable for hi/low byte or low/hi
byte.
Statistical Parameters:
•
•
High, Low, and Last available per channel (during acquisition only). Not
available in single channel burst mode.
available in single channel burst mode.
Time Stamp:
•
•
Available for each scan group and for each channel’s high, low, and last
parameters.
parameters.
Time Format:
•
•
Relative time (
hh:mm:ss.mil
), absolute time (
hh:mm:ss.mil
) or absolute
date and time (
dd/mm/yy hh:mm:ss.mil
). Not available in single channel
burst mode.
Alarm Stamp:
•
•
Available for each scan group. Not available in single channel burst mode.