Nortel Networks NN44200-313 Manual Do Utilizador
63
Appendix
Configuring phantom DNs
Configuring phantom DNs
This appendix describes how to configure phantom DNs.
There are two reasons to configure phantom DNs on the switch:
•
to create a dialable number for CallPilot services such as Application
Builder configurations and voice forms
Builder configurations and voice forms
•
to create virtual fax DNs for users who want a separate fax number
Checking for existing phantom loops
Step
Action
A phantom loop must exist before you begin to configure phantom DNs. Use
this procedure to identify a phantom loop.
this procedure to identify a phantom loop.
1
Connect to the PBX.
2
Enter LD 97.
3
At the REQ prompt, enter PRT.
4
At the TYPE prompt, enter SUPL.
5
Use the capture text function in hyperterminal to save a text file of
the output.
the output.
6
Review the output for a superloop tagged PHANTOM. If a phantom
loop does not exist, perform the procedure below to create one.
loop does not exist, perform the procedure below to create one.
—End—
Configuring a phantom superloop
Step
Action
1
Connect to the PBX.
Nortel CallPilot
Quickstart Guide
NN44200-313
01.02
Standard
5.0
19 May 2008
Copyright © 2007-2008, Nortel Networks
.