Nortel Networks M3820 Manual Do Utilizador

148

Digital Telephone IP Adapter Installation and Administration Guide

Using the digital telephone

 Standard 2.1

Offline Mode

This means you cannot place calls through the host 
PBX. 
Notes: 

!

If you need to place a call through the host PBX 
while in offline mode, enter the online SPRE 
code. Refer to “SPRE Codes: Online” on page 
119 for further details.

!

The Offline Modeïmessage is not persistent 

on the M3903 telephone display. This message 
sometimes only displays for part of the Offline 
period.

Online Mode

This means you can place and receive calls through 
the host PBX.

Port Already in 

Use

If this message appears on your station, your station 
participates in a multi-user or dynamic pool port on 
the RLC.
This message appears if the port that you are 
attempting to log on to is already being used by 
someone else.

Port Not Logged 

In

If this message appears on your station, your station 
participates in a multi-user or dynamic pool port on 
the RLC. Your station is logged off.

Release and Try 

Again

There are not enough DSP resources to process the 
call. Try again at a later time.

Note: Ensure to initiate calls from the appropriate 
calling key according to the following parameters:

!

Use the host calling key to call someone at the 
host PBX site.

Bandwidth Limit

There is not enough bandwidth to complete the 
requested action. Try again at a later time.