Linksys PAP2-NA Manual Do Utilizador

9

For example, to enter the IP address 191.168.1.105 by keypad, press these keys: 191*168*1*105. Press the # 
(pound) key to indicate that you have finished entering the IP address, and then press 1 to save the IP address. To 
cancel your entry and return to the main menu, press * (star).

If the menu is inactive for more than one minute, the Phone Adapter will time out. You will need to re-enter the 
menu by pressing ****.

The settings you have saved will take effect after you have hung up the telephone. The Phone Adapter may reboot 
at this time.

Enter Interactive Voice 
Response Menu

Use this command to enter the 
Interactive Voice Response Menu. Do 
not press any other keys until you 
hear, “Configuration menu. Please 
enter option followed by the # (pound) 
key or hang up to exit.”

Check DHCP

Use this command to find out if DHCP 
has been enabled or disabled. If 
enabled, the Phone Adapter will be 
assigned an IP address automatically 
by your network router or gateway. If 
disabled, then the Phone Adapter will 
use a static IP address.

Enable/Disable DHCP

Enter 1 to enable
Enter 0 to disable

Enable or disable the Phone Adapter’s 
DHCP feature. If your network router 
assigns IP addresses, then enter 1. 
Otherwise, enter 0.

Check IP Address

You will hear the current IP address of 
the Phone Adapter.