Linksys PAP2-NA Manual Do Utilizador

10

Set Static IP Address

Enter the IP address 
using numbers on the 
telephone keypad. Use 
the * (star) key when 
entering a decimal 
point.

To set a static IP address, the DHCP 
feature must be disabled. If the DHCP 
feature is enabled, then you will hear, 
“Invalid Option,” if you try to set a 
static IP address.

Check Network Mask 
(or Subnet Mask)

You will hear the current network 
mask of the Phone Adapter.

Set Network Mask (or 
Subnet Mask)

Enter the network 
mask using numbers 
on the telephone 
keypad. Use the * 
(star) key when 
entering a decimal 
point.

To set the network mask, the DHCP 
feature must be disabled. If the DHCP 
feature is enabled, then you will hear, 
“Invalid Option,” if you try to set the 
network mask.

Check Static Gateway 
IP Address

You will hear the current gateway IP 
address of the Phone Adapter.

Set Static Gateway IP 
Address

Enter the IP address 
using numbers on the 
telephone keypad. Use 
the * (star) key when 
entering a decimal 
point.

To set a static gateway IP address, the 
DHCP feature must be disabled. If the 
DHCP feature is enabled, then you will 
hear, “Invalid Option,” if you try to set 
a static gateway IP address.

Check MAC Address

You will hear the MAC address of the 
Phone Adapter in hexadecimal string 
format.

Check Firmware 
Version

You will hear the version number of 
the firmware currently installed on the 
Phone Adapter.