Yamaha AW4416 Manual Do Utilizador
HOME screen
76
— Reference Guide
MONITOR page
Monitor the input levels of the monitor channels
[Function]
Monitor the input levels of monitor chan-
nels 1–16
nels 1–16
[Key operation]
• [HOME] key → [F2] (Monitor) key
• Repeatedly press the [HOME] key until
• Repeatedly press the [HOME] key until
the screen shown at the right appears
[Mouse operation]
M button → HOME button → Monitor tab
M button → HOME button → Monitor tab
[Screen functions]
A
Level meters
These meters show the input levels of monitor
channels 1–16. The fader position of each chan-
nel is shown in dB units below each level meter.
channels 1–16. The fader position of each chan-
nel is shown in dB units below each level meter.
B
STEREO OUT LEVEL
This shows the position of the STEREO fader in
dB units.
dB units.
C
PRE EQ button
D
POST EQ button
E
POST FADER button
Select one of these three buttons to select the
location in the signal path (pre-EQ/post-EQ/
post-fader) whose level will be shown by the
level meters.
location in the signal path (pre-EQ/post-EQ/
post-fader) whose level will be shown by the
level meters.
■ Additional functions in the Moni-
tor page
In the Monitor page you can press the [SHIFT] key
to assign the following function to the [F1] key.
to assign the following function to the [F1] key.
• [F1] (PEAK HOLD) key
This key sets/defeats the Peak Hold function.
This is the same function as the [PEAK HOLD]
key in the level meter/counter section.
This is the same function as the [PEAK HOLD]
key in the level meter/counter section.
2
3
4
5
1
F1