Yamaha AW4416 Manual Do Utilizador

HOME screen

Monitor the output level of buses 1–8 and 
AUX buses 1–8. In this page you can also 
adjust the master level of each bus.

• [HOME] key → [F3] (Bus) key
• Repeatedly press the [HOME] key until 

the screen shown at the right appears

M button → HOME button → Bus tab

A

These meters show the output levels of buses 1–
8/AUX buses 1–8.

B

These faders adjust the master level of buses 1–
8/AUX buses 1–8. The fader location of each 
bus is shown in dB units below each fader.

To adjust the value of a fader, move the cur-
sor to the desired fader and rotate the [DATA/
JOG] dial.

C

The location of the STEREO fader is shown in 
dB units.

D

E

Select one of these two buttons to select the 
location in the signal path (pre-fader/post-fader) 
whose level will be shown by the level meters.

■ Additional functions in the Bus 

In the Bus page you can press the [SHIFT] key to 
assign the following function to the [F1] key.

This key sets/defeats the Peak Hold function. 
This is the same function as the [PEAK HOLD] 
key in the level meter/counter section.

1

3

4

5

2