ZyXEL Communications 2 Plus Manual Do Utilizador

 Chapter 41 Firmware and Configuration File Maintenance

ZyWALL 2 Plus User’s Guide

Restore configuration via console port by following the HyperTerminal procedure shown next. 
Procedures using other serial communications programs should be similar.

1 Display menu 24.6 and enter “y” at the following screen.

Figure 402   System Maintenance: Restore Configuration

2 The following screen indicates that the Xmodem download has started. 

Figure 403   System Maintenance: Starting Xmodem Download Screen

3 Run the HyperTerminal program by clicking Transfer, then Send File as shown in the 

following screen.

Figure 404   Restore Configuration Example

4 After a successful restoration you will see the following screen. Press any key to restart 

the ZyWALL and return to the SMT menu.

Figure 405   Successful Restoration Confirmation Screen

This section shows you how to upload firmware and configuration files. You can upload 
configuration files by following the procedure in 

 or by following the 

instructions in Menu 24.7.2 - System Maintenance - Upload System Configuration File 
(for console port).

Ready to restore Configuration via Xmodem.
Do you want to continue (y/n):

Starting XMODEM download (CRC mode) ...CCCCCCCCC

Save to ROM
Hit any key to start system reboot.

Type the configuration file’s location, 

or click Browse to search for it.

Choose the Xmodem protocol.

Then click Send.