ZyXEL Communications 2 Plus Manual Do Utilizador
Chapter 41 Firmware and Configuration File Maintenance
ZyWALL 2 Plus User’s Guide
581
Figure 407 Telnet Into Menu 24.7.2: System Maintenance
To upload the firmware and the configuration file, follow these examples
41.5.3 FTP File Upload Command from the DOS Prompt Example
1 Launch the FTP client on your computer.
2 Enter “open”, followed by a space and the IP address of your ZyWALL.
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is “1234”).
5 Enter “bin” to set transfer mode to binary.
6 Use “put” to transfer files from the computer to the ZyWALL, for example, “put
2 Enter “open”, followed by a space and the IP address of your ZyWALL.
3 Press [ENTER] when prompted for a username.
4 Enter your password as requested (the default is “1234”).
5 Enter “bin” to set transfer mode to binary.
6 Use “put” to transfer files from the computer to the ZyWALL, for example, “put
firmware.bin ras” transfers the firmware on your computer (firmware.bin) to the
ZyWALL and renames it “ras”. Similarly, “put config.rom rom-0” transfers the
configuration file on your computer (config.rom) to the ZyWALL and renames it “rom-
0”. Likewise “get rom-0 config.rom” transfers the configuration file on the ZyWALL to
your computer and renames it “config.rom.” See earlier in this chapter for more
information on filename conventions.
ZyWALL and renames it “ras”. Similarly, “put config.rom rom-0” transfers the
configuration file on your computer (config.rom) to the ZyWALL and renames it “rom-
0”. Likewise “get rom-0 config.rom” transfers the configuration file on the ZyWALL to
your computer and renames it “config.rom.” See earlier in this chapter for more
information on filename conventions.
7 Enter “quit” to exit the ftp prompt.
Menu 24.7.2 - System Maintenance - Upload System Configuration File
To upload the system configuration file, follow the procedure below:
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put configurationfilename rom-0" where
"configurationfilename" is the name of your system configuration file on
your workstation, which will be transferred to the "rom-0" file on the
system.
4. The system reboots automatically after the upload system
configuration file process is complete.
2. Type "open" and the IP address of your system. Then type "root" and
SMT password as requested.
3. Type "put configurationfilename rom-0" where
"configurationfilename" is the name of your system configuration file on
your workstation, which will be transferred to the "rom-0" file on the
system.
4. The system reboots automatically after the upload system
configuration file process is complete.
For details on FTP commands, please consult the documentation of your
FTP client program. For details on uploading configuration file using
TFTP (note that you must remain on this menu to upload configuration
file using TFTP), please see your manual.
FTP client program. For details on uploading configuration file using
TFTP (note that you must remain on this menu to upload configuration
file using TFTP), please see your manual.
Press ENTER to Exit: