Cisco Systems 1000 Series Manual Do Utilizador
19-14
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-15
Chapter 19 Cisco ASR 1000 VxLAN Support
show nve peers
show nve peers
To display the network virtualization endpoint (NVE) peers configured on the router, use the show nve
peers command in EXEC mode.
peers command in EXEC mode.
show nve peers
Syntax Description
This command has no arguments or keywords.
Command Modes
EXEC (#)
Command History
Examples
The following example shows the NVE peers configured on the router:
Router# show nve peers
Interface Peer-IP VNI Up Time
nve1 1.1.1.2 1010 10h
nve2 1.1.1.3 2030 20h
describes the significant fields shown in the display.
Related Commands
Release
Modification
Cisco IOS XE Release 3.11S
This command was introduced on the Cisco ASR 1000 Series
Routers.
Routers.
Table 19-2
show nve peers Field Descriptions
Field
Description
Interface
The NVE interface.
Peer-IP
The peer IP address of the NVE interface.
VNI
The VNI number.
Up Time
The length of time for which the NVE interface has been up.
Command
Description
show nve interface
Displays the NVE interface information.
show nve vni
Displays the NVE VNIs configured on the router.