Lucent Technologies PortMaster Manual Do Utilizador
Configuration Steps for Leased Line Connections
19-4
PortMaster Configuration Guide
Configuring the PortMaster Office Router in Rome
Configure the settings for the PortMaster Office Router in Rome with the values in the
following sections.
following sections.
Configuring Global Settings
Configure the global settings to the values shown in Table 19-1.
After you configure the global settings shown in Table 19-1, enter the following
command to save the configuration:
command to save the configuration:
Command> save all
For more information about global settings, refer to Chapter 3, “Configuring Global
Settings.”
Settings.”
Configuring Ethernet Interface Settings
Configure the Ethernet interface on the PortMaster Office Router in Rome to the values
shown in Table 19-2.
shown in Table 19-2.
Table 19-1
Global Values
Setting
Command
IP gateway
set gateway 192.168.1.1
System name
set sysname rome
Table 19-2
Ethernet Values
Setting
Command
IP address
set ether0 address 192.168.200.1
Netmask
set ether0 netmask 255.255.255.0
IPX network
set ether0 ipxnet F1
IPX frame type
set ether0 ipxframe ethernet_802.2
Broadcast address
set ether0 broadcast high
RIP routing
set ether0 rip on