Adtran 1202890E1 Manual Do Utilizador
Physical Descriptions
NetVanta 4300/4400 Series
22
Copyright © 2013 ADTRAN, Inc.
61200890E2-34R
CompactFlash
The NetVanta 4430 front panel contains a
CompactFlash
®
slot for nonvolatile configuration storage
and compressed code storage. ADTRAN supports only ADTRAN-provided CompactFlash (16 MB to
1 GB) (refer to the list of part numbers on the front cover). Refer to
1 GB) (refer to the list of part numbers on the front cover). Refer to
.
NetVanta 4430 Rear Panel Design
shows the NetVanta 4430 rear panel. The chassis are shown with the T1/FT1 + DSX-1 NIM
installed.
Figure 5. NetVanta 4430 Rear Panel Layout
NetVanta 4430 Rear Panel Interfaces and LEDs
10/100/1000Base-T Gigabit Ethernet Interfaces/SFP Slots
The Gigabit Ethernet ports (
GIG 0/1, GIG 0/2
) provide two fixed RJ-45 connectors with LEDs and two
SFP slots for fiber connectivity. (Use either the RJ-45 connectors or the SFP slots. The fiber slots have
precedence.) The RJ-45 LEDs reflect the activity on either the RJ-45 port or the SFP slot. The yellow
activity LED flashes when data traffic is being sent or received. The green link LED is on when the
router has a good connection to the LAN. See
precedence.) The RJ-45 LEDs reflect the activity on either the RJ-45 port or the SFP slot. The yellow
activity LED flashes when data traffic is being sent or received. The green link LED is on when the
router has a good connection to the LAN. See
Ethernet port provides the following:
•
10Base-T, 100Base-T, or 1000Base-T via RJ-45
•
100Base-X or 1000Base-X via SFP
•
Auto-negotiation
•
CSMA/CD
•
IEEE 802.3 compatibility
•
Auto MDIX
NET/DBU and Wide Module Option Slots
The
WIDE MODULE
slot accepts the Octal T1/E1 Wide Module. The
SLOT 2 NET/DBU
and
SLOT 1
NET/DBU
option slots support various NIM plug-in modules. These option modules are described in
Power Supply
The NetVanta 4430 has a worldwide auto-ranging AC power supply with an IEC connector. The
appropriate three-prong cable is included in the shipment. Please refer to
appropriate three-prong cable is included in the shipment. Please refer to
for connection details.
Previous versions of the NetVanta 4430 were equipped with either a 120 VAC,
50/60 Hz (1700630G1#120) or 240 VAC, 50/60 Hz (1700630G1#240) power supply.
Plugging these units into an incompatible power source will damage the unit. Refer to
the label on the unit before connecting the unit to the power source.
50/60 Hz (1700630G1#120) or 240 VAC, 50/60 Hz (1700630G1#240) power supply.
Plugging these units into an incompatible power source will damage the unit. Refer to
the label on the unit before connecting the unit to the power source.
SLOT 1 NET/DBU
SLOT 2 NET/DBU
WIDE MODULE
100-250VAC
50/60Hz
WAN-T1
DSX-1
DBU
WAN-T1
DSX-1
DBU
GIG 0/1
GIG 0/2