McDATA 3000 Manual Do Utilizador

The Create Data Path Wizard - Choose Data Path Options screen 
appears.

Use this dialog box to choose the data path options you want 
enabled between the Fibre Channel interfaces.

Enable Disk Streaming

Check this box to enable E_port Disk Streaming. E_port Disk 
Streaming increases performance in networks that have a round trip 
latency greater than 10 ms. It moves data more efficiently than our 
standard E_port solution. 

E_port Disk Streaming is disabled by default (the box is not 
checked). To verify if E_port Disk Streaming has been enabled 
after the network has been configured, refer to the “E_Port Disk 
Streaming Settings” section in Appendix D, Advanced UCM 
Configurations. 

Chapter 3, Network Design Criteria, provides network 
recommendations for E_port Disk Streaming, see the “E_Port 
Disk Streaming Network Recommendations” section.

Enable Switch WWN Proxy

Use this dialog box to choose whether you would like to enable 
the Switch WWN Proxy between Node10 and Node20. If this 
option is enabled, the Fibre Channel driver will respond to 
Exchange Link Parameter (ELP) requests with the World Wide 
Name (WWN) of the remote Fibre Channel Switch. This option is 
disabled by default (the box is not checked).