McDATA 3000 Manual Do Utilizador

McDATA UltraNet Edge 3000 User Guide

5. Remove the two screws at the rear of the Fibre Channel interface 

card.

6. Carefully pull the Fibre Channel interface card up. It is connected 

to two socketed connectors.

7. Remove the Fibre Channel interface card from the chassis.

8. Follow the Fibre Channel Interface Card Installation Procedure to 

install a new Fibre Channel interface card. 

Use the following procedure to install the Fibre Channel (FCBB) 
interface card into the UltraNet Edge 3000 chassis.

A small Phillips screwdriver and an adjustable 

Torque driver, rated between 3 and 15 in-lbs.

1. Carefully insert the Fibre Channel interface card in either I/O 1 or 

I/O 2. 

Sb1

12

Fibre Channel
Interface Card

(1 Gigabit or 2 Gigabit)

Screw (2)

I/O 4

I/O 2

I/O 1

I/O 3