McDATA 3000 Manual Do Utilizador

 UltraNet™ Edge Storage Router 3000 User Guide 

The following sections list the cables, connectors, and other 
equipment needed for the UltraNet Edge 3000.

The cables, adapters, and other equipment listed in Table B-3 are 
supplied by McDATA.

Power cords (2)

The UltraNet Edge 3000 system comes with two 7.5-foot (2.3 meters) 
IEC 320 - C 13 power cords (for use in the U.S. and Canada only). The connector 
on the power cord is a three-pronged plug (NEMA 5-15P).

NOTE: McDATA supplies the required power cords for some international 
shipments.

Modem

A Multi-Tech modem is required as part of the optional remote support kit (site 
specific).

AA adapter

This cable adapter is provided with the UltraNet Edge 3000 and the optional 
remote support kit. It inserts into the DCE port on the back of the remote modem 
for direct connection to the UltraNet Edge 3000.

(One AA adapter is needed when using a remote modem.)

See Appendix C for cable adapter information.

EE adapter 

This cable adapter inserts into the DTE interface on the back of the PC for direct 
connection to the serial interface on the UltraNet Edge 3000.

See Appendix C for cable adapter information.

RS-232 cables 
with RJ-45 
connectors 

This cable is used when serial connectivity is needed between an UltraNet Edge 
3000 and a PC or modem. 

See Appendix C for cable adapter information.

Ethernet straight 
through Category 
5 cable 

This cable is used to connect theUltraNet Edge 3000 to the network via the 
Ethernet Maintenance Interface.

Ethernet 
crossover 
Category 5 cable 

This cable is used to directly connect the UltraNet Edge 3000 to a PC.