Netgear RT314 Manual Do Utilizador

Reference Guide for the Model RT311 and RT314 Internet Access Gateway Routers

6-4

Maintenance

The DHCP Table shows all IP address assignments that have been made by the router’s DHCP 
server. From the Main Menu of the browser interface, click on Maintenance, then select DHCP 
Table to view the table, shown in 

For each PC client, the table shows the IP address, Ethernet MAC address, and NetBIOS Host 
Name. Note that if the router is rebooted, the table data is lost until each PC renews its DHCP 
lease.

The routing software of the Model RT311 and RT314 routers is stored in FLASH memory, and can 
be upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from 
Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary 
(.BIN) file before sending it to the router. The upgrade file can be sent to the router using your 
browser. 

The Web browser used to upload new firmware into the Model RT311 and RT314 routers 

must support HTTP uploads. NETGEAR recommends using Netscape Navigator 3.0 or above. 

To reach the Upgrade menu, click Maintenance from the navigation bar on the left, and then click 
the Upgrade heading. To upload new firmware:

1.

Download and unzip the new software file from NETGEAR. 

2.

In the Software Upgrade menu, click the Browse button and browse to the location of the 
binary (.BIN) upgrade file

3.

Click Upload.