Netgear DGND3300 Manual Do Utilizador

Default Configuration and Technical Specifications

A-1

This appendix provides factory default settings and technical specifications for the RangeMax 
Dual Band Wireless-N Modem Router.

This section explains how to restore the factory default configuration settings. This procedure 
restores the admin user name password to password, and the IP address to 192.168.0.1. You can 
erase the current configuration and restore factory defaults in two ways:

•

Use the Erase function of the router (see 

).

•

Use the Restore Factory Settings button on the rear panel of the router. Use this method for 
cases when the administration password or IP address is not known.

To restore the factory configuration settings without knowing the administration password or IP 
address, you must use the Restore Factory Settings button on the rear panel of the modem router.

1. Press and hold the Restore Factory Settings button until the Power LED turns red (about 6 

seconds).

2. Release the Restore Factory Settings button and wait for the router to reboot.The Power LED 

will blink red three times and then will turn green when the default configuration settings have 
been restored.

Note: This procedure erases your current configuration, including your wireless security. 

When you log in after resetting, you will be prompted to configure these settings.