Netgear D6200 Manual Do Utilizador
NETGEAR genie ADVANCED Home
50
D6200 WiFi DSL Modem Router
To change the MTU size:
1.
Select ADVANCED > Setup > WAN Setup.
2.
In the MTU Size field, enter a new size from 64 through 1500.
3.
Click Apply.
LAN Setup
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The WiFi DSL modem router is shipped preconfigured to use private IP addresses on the
LAN side and to act as a DHCP server. The WiFi DSL modem router’s default LAN IP
configuration is:
LAN side and to act as a DHCP server. The WiFi DSL modem router’s default LAN IP
configuration is:
•
LAN IP address. 192.168.0.1
•
Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private networks
and should be suitable for most applications. If your network requires a different IP
addressing scheme, make changes in the LAN Setup screen.
and should be suitable for most applications. If your network requires a different IP
addressing scheme, make changes in the LAN Setup screen.
Note:
If you change the LAN IP address of the WiFi DSL modem router
while connected through the browser, you are disconnected. You
have to open a new connection to the new IP address and log in
again.
while connected through the browser, you are disconnected. You
have to open a new connection to the new IP address and log in
again.