Netgear D6200 Manual Do Utilizador

Select the language and click OK.

This procedure installs the utility.

On each computer on your network that shares the USB printer, perform the initial setup of 

the NETGEAR USB Control Center.

The first time you use the USB printer that is connected to your WiFi DSL modem router, 
you are asked to select the USB printer. For more information, see 

73.

(Optional) Change the default settings.

The first time you use the USB printer that is connected to your WiFi DSL modem router, you 
are asked to select the USB printer.

When a USB printer is detected and connected automatically during the initial setup, you 
have to disconnect the printer and wait for the prompt asking you to click Connect.

You might be asked to install the driver for this printer. After the driver is installed, the 
printer status changes to Available.

Some firewall software, such as Comodo, blocks the NETGEAR USB Control Center utility 
from accessing the USB printer. If you do not see the USB printer in the utility, you can 
disable the firewall temporarily to allow the utility to work.