Netgear DG834G Manual Do Utilizador

Troubleshooting

8-1

This chapter gives information about troubleshooting your DG834G 54 Mbps Wireless ADSL 
Firewall Router . After each problem description, instructions are provided to help you diagnose 
and solve the problem. For the common problems listed, go to the section indicated.

•

Is the router on?

•

Have I connected the router correctly?

Go to 

•

I can’t access the router’s configuration with my browser.

Go to 

.

•

I’ve configured the router but I can’t access the Internet.

Go to 

“Troubleshooting the ISP Connection” on page 8-4

.

•

I can’t remember the router’s configuration password.

•

I want to clear the configuration and start over again.

Go to 

After you turn on power to the router, the following sequence of events should occur:

1.

When power is first applied, verify that the Power LED is on (see 

 for an illustration and explanation of the LEDs).

2.

Verify that the Test LED lights within a few seconds, indicating that the self-test procedure is 
running.

3.

After approximately 10 seconds, verify that:

a.

The Test LED is not lit.

b.

The LAN port LEDs are lit for any local ports that are connected.

c.

The WAN port LED is lit.