Fortinet 127 Manual Do Utilizador

Confirm that the addresses are correct. Enter:

get system interface

The CLI lists the IP address, netmask, and other settings for each of the FortiGate 
interfaces.

• Set the primary and secondary DNS server IP addresses. Enter

config system dns

set primary <address_ip>
set secondary <address_ip>

end

config system dns

set primary 293.44.75.21
set secondary 293.44.75.22

end

Add a default route to configure where the FortiGate unit sends traffic that should be 
sent to an external network (usually the Internet). Adding the default route also 
defines which interface is connected to an external network. The default route is not 
required if the interface connected to the external network is configured using DHCP 
or PPPoE.

• Set the default route to the Default Gateway IP address. Enter:

config router static

edit 1

set dst 0.0.0.0 0.0.0.0
set gateway <gateway_IP>
set device <interface>

end

If the default gateway IP is 204.23.1.2 and this gateway is connected to port2:

config router static

edit 1

set dst 0.0.0.0 0.0.0.0
set gateway 204.23.1.2
set device port2

end