Huawei HG532 Manual Do Utilizador

By configuring the HG532 and your computer, you can choose any of the following 
methods to surf the Internet: 

z

 

Accessing the Network Through the Embedded PPP Dial-Up Software on the 
HG532 

z

 

If you select this method for accessing the network, the HG532 starts to set up a dial-up 
connection automatically after the startup. You can access the network after you power 
on your computer. You do not need to install any special dial-up software on your 
computer or perform dial-up operations on your computer. To configure the HG532 and 
your computer for the network access, do as follows: 
Step 1  Verify the HG532 and the PC have connected properly, and the PC has 

obtained the IP address. 

Step 2  Log in to the Web-based configuration utility of the HG532. 
Step 3  Enable the embedded dial-up function. 

1.  In the navigation tree on the left of the Web-based configuration utility, 

choose Basic > WAN. 

2.  Select a PVC from the connection list. 
3.  Select Route from the Connection mode drop-down combo box. 
4.  Enter the VPI and VCI parameters that are provided by the network 

operator in the VPI/VCI text boxes. 

5.  Select PPPoE from the Connection type drop-down combo box. 
6.  Enter the user name and password that are provided by the network 

operator in the Username and Password text boxes, keep the default 
settings of other parameters. 

7.  Click Submit. 

After you complete the preceding settings, you can surf the Internet. 
You need to perform the preceding operations on a computer once only. The next time 
when you power on your computer, you can surf the Internet without any configuration. 

If you select this method for accessing the network, you need to install and configure 
the dial-up software on your computer. In addition, you need to perform dial-up 

8