Avaya G250 Manual Do Utilizador
Configuring Trap Managers
Issue 5 October 2007
205
Enable SNMP
Authentication-Failure
trap
Authentication-Failure
trap
When checked, enables SNMP Authentication-Failure trap.
Enable RTP QoS trap
When checked, enables RTP QoS trap.
Enable RTP QoS Fault trap When checked, enables RTP QoS Fault trap.
Manager IP
IP address of the management station that receives traps.
User Name
The SNMPv3 user authentication name.
Notify Type
The type of notification. Possible values are:
●
Trap
●
Event
Notify Mode
Select the notification Mode. Possible values are:
●
SNMPv1
●
SNMPv3
Inform Timeout
The number of seconds for an event message to connect to the
manager before failing.
manager before failing.
Inform Retry Count
The number of failed event attempts before an event is
discarded.
discarded.
Config Change Events
When checked, configuration change events are sent to the
manager.
manager.
SW Redundancy Event
When checked, software redundancy events are sent to the
manager.
manager.
PoE Events
When checked, PoE events are sent to the manager.
Hardware events
When checked, hardware events are sent to the manager.
RMON Events
When checked, RMON events are sent to the manager.
DHCP Client Events
When checked, DHCP client events are sent to the manager.
FileSys Events
When checked, Avaya Load MIB events such as download and
upload success/failure/start, are sent to the manager.
upload success/failure/start, are sent to the manager.
DHCP Server Events
When checked, DHCP server events are sent to the manager.
TFTP Events
When checked, TFTP events are sent to the manager.
WAN Events
When checked, WAN events are sent to the manager.
Media Gateway Events
When checked, Media Gateway events are sent to the
manager.
manager.
Security Events
When checked, security events are sent to the manager,
including 802.1x and MSS notifications.
including 802.1x and MSS notifications.
Table 66: Device Trap Managers Table (continued)
Item
Description
2 of 3