Avaya G250 Manual Do Utilizador

This chapter provides the information and instructions for configuring trap managers for the 
Avaya G250/G350/G450 Device. It includesthe following sections:

●

 - An overview of trap managers.

●

 - Instructions on accessing the device’s Trap Managers Table, 

and a description of the Trap Managers Table.

●

 - Instructions on how to edit the Trap Managers Table.

In the event of a fault or an unusual occurrence, the Avaya G250/G350/G450 Device can send 
traps to one or more Network Management Stations (NMS). To enable this feature, you must 
configure the Avaya G250/G350/G450 Device with a list of the managers’ workstations. Traps 
are then sent to the stations listed in the Managers table. 

Note:

Up to nine managers can be assigned per device. However, it is recommended to 
keep the list limited to actual and relevant managers so as not to place undue 
stress on the network.

Using the Trap Managers Table, you can also configure which traps are sent. Checking the 
checkbox for a trap enables the manager to receive the checked trap. Managers only receive 
the traps which are checked.