Avaya CMC1 Manual Do Utilizador

To set daylight savings rules:

1. Type change daylight-savings-rules and press RETURN.

Note:

The default daylight savings rule is 0, meaning no daylight savings transition.

2. Type the appropriate Start and Stop information in the 

Change Day

, 

Month

, 

Date

, 

Time

, 

and 

Increment

 fields for each rule. For example, 1:00 in the 

Increment

 field means to 

move the clock forward or back by one hour at the transition point.

Note:

You can change any rule except rule 0 (zero). You cannot delete a daylight 
savings rule if it is in use on either the Locations or Date and Time screens.

3. Press ENTER.

To verify the upgrade:

1. Type status system 1 and verify that the system is in a normal state.

Check these fields for the corresponding values:

●

In the 

SPE ALARMS

 section, 

MAJOR

 and 

MINOR

 alarms = 

0

●

Service State

 = 

in service

2. Type display alarms and press RETURN.

If there are alarms, take the necessary corrective actions.

DAYLIGHT SAVINGS RULES

Rule

Change Day

Month

Date

Time

Increment

0: No Daylight Savings

1: Start: first Sunday___ on or after April

1

at _2:00

01:00

Stop: first Sunday___ on or after October

25 at _2:00

2: Start: first _________ on or after ________ __ at __:__

Stop: first _________ on or after ________ __ at __:__

3: Start: first _________ on or after ________ __ at __:__

Stop: first _________ on or after ________ __ at __:__

4: Start: first _________ on or after ________ __ at __:__

Stop: first _________ on or after ________ __ at __:__

5: Start: first _________ on or after ________ __ at __:__

Stop: first _________ on or after ________ __ at __:__