Avaya CMC1 Manual Do Utilizador

●

Hospitality (Basic)

●

Service Observing

To check customer options:

1. Type display system-parameters customer-options and press Enter. 

2. Using the customer order, ensure that the optional features purchased by the customer (as 

shown by PEC codes on the customer order) are enabled.

Note:

For detailed mapping of SAP material codes to DEFINITY features, capacities, 
release, platform, and offer category, go to the RFA website Information Page, in 
the Help Info section, click on the “Material Code/Feature Job Aid” link.

Some country options need to be set to turn off the red alarm LEDs. To set country options:

1. Enter change system-parameters country options and press Enter. A screen similar to 

 displays on the terminal. The cursor is set on the 

Companding Mode

 field.

2. The default (United States) companding mode is mu-Law. If the country uses A-Law 

companding, type A-Law. Press Enter when finished.

Note:

Other items eventually need to be entered on this screen, but this is all that is 
needed to turn the red alarm LEDs off. 

change system-parameters country-options                        Page   1 of 23 

                       SYSTEM PARAMETERS COUNTRY-OPTIONS

              Companding Mode: Mu-Law           Base Tone Generator Set: 1 

          440Hz PBX-dial Tone? n              440Hz Secondary-dial Tone? n

       Analog Ringing Cadence: 1     Set Layer 1 timer T1 to 30 seconds? n

     Analog Line Transmission: 1 

        Display Character Set: Roman    

       Howler Tone After Busy? n   Disconnect on No Answer by Call Type? n

TONE DETECTION PARAMETERS

          Tone Detection Mode: 6

             Interdigit Pause: short