Avaya G450 Manual Do Utilizador

The first row in the Device Trap Managers Table is reserved for the Dynamic Trap Manager 
entry. The Dynamic Trap Manager is discovered automatically and the IP address is read-only. 
The entry row for the Dynamic Trap Manager is highlighted in grey.

For information on adding and removing trap managers and editing their trap reporting statuses, 
refer to 

You can add and remove managers from the Trap Managers table.

To add managers to the table:

1. Click Insert.

2. Enter the IP address of the designated management station.

3. Repeat the procedure for each manager.

To remove managers from the table:

1. Click the row with the manager’s IP address. 

2. Click Delete.

3. Repeat the procedure for each manager.

When checked, TFTP Server events are sent to the manager.

When checked, RADIUS authentication events are sent to the 
manager.

When checked, Power over Ethernet events are sent to the 
manager.

When checked, RTP events are sent to the manager.

When checked, Layer 3 events are sent to the manager.

When checked, link events are sent to the manager.

When checked, policy events are sent to the manager.

When checked, Ethernet port fault events are sent to the 
manager.

When checked, generic events are sent to the manager.