Avaya G450 Manual Do Utilizador

You can create, modify, and delete IP interfaces. For more information on editing tables, refer to 

.

Note:

IP Address, IP NetMask, Layer 2 Interface Name, and Status must be defined 
before creating an IP interface.

When enabled, the router responds to ARP requests received on a 
Layer 2 interface for a device reachable on a different Layer 2 
interface. The response is the MAC address of the router interface.

Note:

This field is only available when additional parameters 
are selected. To select additional parameters, 
click 

 on the Routing Manager Application Toolbar.

The status of Netbios rebroadcast service on the interface. Possible 
values are:

●

Both - Netbios messages are rebroadcasted both to and from 
this interface.

●

Disable - Netbios messages are rebroadcasted neither to nor 
from this interface.

Note:

This field is only available when additional parameters 
are selected. To select additional parameters, 
click 

 on the Routing Manager Application Toolbar.

The status of ICMP Redirect service on the interface. Possible values 
are:

●

Enable - Redirect messages are sent if the router is forced to 
resend a packet through the same interface from which it was 
received.

●

Disable - Redirect messages are not sent.

Note:

This field is only available when additional parameters 
are selected. To select additional parameters, 
click 

 on the Routing Manager Application Toolbar.

Define the broadcast address value. Possible values are: 

●

Zero Fill - defines the broadcast address as zero. For example, 
192.92.0.0.

●

One Fill - defines the broadcast address as one. For example, 
192.92.255.255.