ONKYO TX-NR808 Manual Do Utilizador

En

*1

If Pure Audio or Direct listening mode is selected, 
“Dynamic EQ” and “Dynamic Volume” cannot be selected.

*2

Only when you have selected “Custom” in the “Picture 
Mode” (

53), pressing ENTER allows you to adjust the fol-

lowing items via the Home menu; “Brightness”, “Contrast”, 
“Hue” and “Saturation”. Press RETURN to return to the 
original Home menu.

*3

Depending on the input source and listening mode, not all 
channels shown here output the sound.

*4

When you have entered a custom name in “Name Edit” 
(

52), the input source is displayed with that name. But 

even if not, the component name may be displayed if the AV 
receiver receives it via HDMI connection (

*5

For the PORT input selector, the name of Universal Port 
Option Dock will be displayed.

When you connect an 

u-capable Onkyo component, you 

must configure the input display so that 

u can work 

properly.
This setting can be done only from the front panel.

• DOCK can be selected for the TV/CD, GAME or VCR/DVR 

input selector, but not at the same time.

• Enter the appropriate remote control code before using the 

remote controller for the first time (

• Always turn down the volume before connecting your head-

phones.

• While the headphones plug is inserted in the PHONES jack, the 

Headphone indicator, speaker/channel indicator FL and FR 
lights. (The Powered Zone 2 speakers are not turned off.)

• When you connect a pair of headphones, the listening mode is 

set to Stereo, unless it’s already set to Stereo, Mono, Direct, or 
Pure Audio. 

• Only the Stereo, Direct, Pure Audio, and Mono listening modes 

can be used with headphones.

Using the Easy macro command in the Easy macro mode, 
you can sequentially operate Onkyo components with sim-
ple commands by simply pressing one button. These com-
mands are user-specifiable (

85) and the default actions 

are described below. Press ACTIVITIES to start the Easy 
macro command.
Once the AV receiver has entered the normal macro mode, 
all of ACTIVITIES will automatically switch to the nor-
mal macro mode. In this case, pressing ALL OFF will set 
only the AV receiver to Standby mode.

(about 3 seconds) to change the input display.
Repeat this step to select “MD”, “CDR”, “DOCK” 
or “TAPE”.
For the TV/CD input selector, the input display 
changes in this order: 

For the GAME input selector, the setting changes in 
this order: 

For the VCR/DVR input selector, the setting 
changes in this order: 

TV/CD  

→  

MD  

→  

→

 

→

 

→

 

↔ DOCK

↔ DOCK

MY MOVIE (default):
1. The TV connected to the AV receiver is turned 

on.

2. The Onkyo DVD player connected to the AV 

receiver is turned on.

3. The AV receiver is turned on.
4. The input selector of the AV receiver is set to 

“BD/DVD”.

5. The player starts playback.

*1

MY TV (default):
1. The TV connected to the AV receiver is turned 

on.

2. The cable set-top box connected to the AV 

receiver is turned on.

3. The AV receiver is turned on.
4. The input selector of the AV receiver is set to 

“CBL/SAT”. You can enjoy cable TV.