Avaya X330W2-DS1 Manual Do Utilizador
Chapter 7
X330WAN CLI Commands
136
Avaya X330W-2DS1 User’s Guide
loopback remote
{line|payload}
Example:
X330WAN-2DS1-1(config-controller:1)#loopback remote line
X330WAN-2DS1-1(config-controller:1)#loopback remote line
mtu (Serial interface context)
Use the mtu command to set the interface Maximum Transmission Unit (MTU). Use
the no form of this command to restore interface MTU to the default value (1500).
the no form of this command to restore interface MTU to the default value (1500).
The syntax for this command is:
[no] mtu
<size in bytes>
Example:
X330WAN-2DS1-1(config-if:Serial1:1)# mtu 1000
no channel group (Controller context)
Use the no channel group command to delete a channel group.
The syntax for this command is:
no channel-group
no channel-group
<channel-num>
Example:
X330WAN-2DS1-1(config-controller:1)# no channel-group 2
no loopback (Controller context)
Use the no loopback command to disable the loopback mode.
line
The controller loops the external line signal back toward the
network without reframing the DS1 signal.
network without reframing the DS1 signal.
payload
The controller loops the external line signal back toward the
network and reframes the DS1 signal. (This option is available
in the framing esf mode and only when fdl is defined.)
network and reframes the DS1 signal. (This option is available
in the framing esf mode and only when fdl is defined.)
size in bytes
Range from 64-1500
channel-num
ID number to identify the channel group. The valid
range is from 0 to 23 for T1 lines and from 0 to 30 for
E1 lines.
range is from 0 to 23 for T1 lines and from 0 to 30 for
E1 lines.