Avaya X330W2-DS1 Manual Do Utilizador

WAN CLI Commands

Avaya X330W-2DS1 User’s Guide

143

Use the show controllers remote command to display far end performance 
data through an fdl message. 

This command is used when the fdl at&t option is defined.

The syntax for this command is:
 show controllers remote  <port> <fdl-request-type>

Example:         

X330WAN-2DS1-1(super)# show controllers remote 1 1h-data

Severly Err 
Secs

For ESF (T1) signals, displays the number of seconds one of the 
following is detected:
• 320 or more Path Code Violation Errors.
• One or more Out of Frame defects.
• An  AIS  defect.
For SF (T1) signals, displays the number of seconds one of the 
following is detected:
• 1544 Line Code Violations.
• A count of one second intervals with Framing Errors.
• An Out of Frame defect.
For CRC (E1) signals, displays the number of seconds one of 
the following is detected:
• 832 or more Path Code Violation errors.
• One or more Out of Frame defects.
For no-CRC (E1) signals, displays the number of seconds with 
2048 or more Line Code Violations.

Unavail Secs

Displays the total number of seconds on the interface, 
calculated by counting the number of seconds that the interface 
is unavailable.

port

Number of the port.

fdl-request- 
type

Request types include:  
• 1h-data 
• Enhanced-CI-configuration
• Enhanced-1h     
• Errored-ESF-data