Avaya X330W2-DS1 Manual Do Utilizador
Chapter 7
X330WAN CLI Commands
52
Avaya X330W-2DS1 User’s Guide
The syntax for this command is:
hostname
[<hostname_string>]
no hostname
Use the no hostname command to return the CLI prompt to its default.
The syntax for this command is:
no hostname
nvram initialize
Use the nvram initialize command to reset the WAN parameters to the
factory defaults.
factory defaults.
The syntax for this command is:
nvram initialize
Output Example:
X330WAN-2DS1-1(super)# nvram initialize
This command will restore factory defaults, and can disconnect
your telnet session
*** Reset *** - do you want to continue (Y/N)?
Connection closed by foreign host.
host%
X330WAN-2DS1-1(super)# nvram initialize
This command will restore factory defaults, and can disconnect
your telnet session
*** Reset *** - do you want to continue (Y/N)?
Connection closed by foreign host.
host%
reset
Use the reset command to restart the system.
If you want to keep changes you made to the current running configuration use the
copy running-config startup-config
If you want to keep changes you made to the current running configuration use the
copy running-config startup-config
command first.
Note:
You should perform a reset after downloading software to the device.
The syntax for this command is:
reset
hostname_string
none
– displays current hostname
string
– the string to be used as the hostname
(up to 20 characters).