Avaya X330W2-DS1 Manual Do Utilizador

General: Device Commands

Avaya X330W-2DS1 User’s Guide

53

Output Example:
X330WAN-2DS1-1(super)# reset
This command will reset the module and may disconnect your 
telnet session.
*** Reset the device *** - do you want to continue (Y/N)? y
Connection closed by foreign host.

Use the set boot bank command to configure the software bank from which the 
device will boot at the next boot process. 

The syntax for this command is:

 <value>

Output Example:
X330WAN-2DS1-1(super)# set boot bank bank-a
Boot bank set to bank-a

The set logout command is used to set the number of minutes until the system 
automatically disconnects an idle session.

The syntax for this command is:

 [timeout] 

Output Example:
To set the number of minutes until the system disconnects an idle session 
automatically:
X330WAN-2DS1-1(super)# set logout 20
Sessions will be automatically logged out after 20 minutes of 
idle time.

value

{bank-a | bank-b}

timeout

Number of minutes (0 to 999) until the system automatically 
disconnects an idle session. Setting the value to 0 disables the 
automatic disconnection of idle sessions (default is 15 minutes).