Avaya X330WAN Manual Do Utilizador

Chapter 6

X330WAN CLI Commands

132

Avaya X330WAN User’s Guide

X330W-2USP-1(super-if:Serial2)# idle-character marks

Use the 

ignore-dcd 

command to configure the serial interface to monitor the 

DSR/CTS signals instead of the DCD signal as the line up/down indicator. The 

no

 

form of this command restores DCD monitoring as the line status indicator 
(default).

X330W-2USP-1(super-if:Serial2)# ignore-dcd

Use the

 interface Serial 

command to create and/or enter 

interface Serial

 

context. For LAN interfaces, use this command to create the interface. The 

no

 form 

of this command deletes an IP interface.

<if-number>[<if-link-type>]

flags

Flags are transmitted to indicate an idle line. This is the default.

marks

Marks (all ones) are transmitted to indicate an idle line.

if-number

Comprised of: 

port:channel-group[.ip-interface|sub-

interface[.ip-interface]].

•

port

The controller number (port number) for this serial port. For 
the X330W-2DS1, this value is either 1 or 2.

•

channel-group

An integer. For E1, between 0 and 30; for T1, between 0 and 23.

•

ip-interface

The IP interface number within this interface (as a number of IP 
interfaces might be bound to a Layer 3 interface). An integer 
from 0 to 1024.

if-link-type

Point-to-point.