Manualsbrain.com
  1. Manuais
  2. Marcas
  3. ZyXEL Communications
  4. AMG1302
  5. Manual Do Utilizador

ZyXEL Communications AMG1302 Manual Do Utilizador

Download
Página de 320
Chapter 9 Static Route
AMG1302/AMG1202-TSeries User’s Guide
136
9.1.1  What You Can Do in the Static Route Screens
• Use  the  Static Route screens (
) to view and configure IP static routes 
on the AMG1302/AMG1202-TSeries.
• Use  the  IPv6 Static Route screens (
) to view and configure IPv6 static 
routes on the AMG1302/AMG1202-TSeries.
9.2  The Static Route Screen
Use this screen to view the static route rules. Click Network Setting > Static Route to open the 
Static Route screen.
Figure 55   
Network Setting > Static Route
The following table describes the labels in this screen. 
9.2.1  Static Route Add/Edit   
Use this screen to add or edit a static route. Click Add new Static Route Entry in the Routing 
screen or the Edit icon next to the static route you want to edit. The screen shown next appears.
Table 36   
Network Setting > Static Route
LABEL
DESCRIPTION
Add new static 
route
Click this to configure a new static route.
#
This is the number of an individual static route.
Destination IP
This parameter specifies the IP network address of the final destination. Routing is always 
based on network number. 
Gateway
This is the IP address of the gateway. The gateway is a router or switch on the same 
network segment as the device's LAN or WAN port. The gateway helps forward packets to 
their destinations.
Subnet Mask
This parameter specifies the IP network subnet mask of the final destination.
Metric
This is the number of transmission hops between this AMG1302/AMG1202-TSeries and 
the destination.
Modify
Click the Edit icon to go to the screen where you can set up a static route on the 
AMG1302/AMG1202-TSeries.
Click the Delete icon to remove a static route from the AMG1302/AMG1202-TSeries. A 
window displays asking you to confirm that you want to delete the route.