ZyXEL Communications AMG1302 Manual Do Utilizador

 Chapter 10 Quality of Service (QoS)

AMG1302/AMG1202-TSeries User’s Guide

The following table describes the labels in this screen. 

Use this screen to configure QoS queue assignment disciplines and priorities.

Click Network Setting > QoS > Queue to open the screen as shown next.

Network Setting > QoS > Queue

The following table describes the labels in this screen. 

Network Setting > QoS > General

Active QoS

Use this field to turn on QoS to improve your network performance.

Traffic priority will be 
automatically assigned by 

Select how the AMG1302/AMG1202-TSeries assigns priorities to various 
incoming and outgoing traffic flows.

•

None: Disables auto priority mapping and has the AMG1302/AMG1202-

TSeries put packets into the queues according to your classification rules. 

Traffic which does not match any of the classification rules is mapped into the 

default queue with the lowest priority.

•

Ethernet Priority: Automatically assign priority based on the IEEE 802.1p 

priority level.

•

IP Precedence: Automatically assign priority based on the first three bits of 

the TOS field in the IP header.

•

Packet Length: Automatically assign priority based on the packet size. 

Smaller packets get higher priority since control, signaling, VoIP, internet 

gaming, or other real-time packets are usually small while larger packets are 

usually best effort data packets like file transfers.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Network Setting > QoS > Queue

#

This is the index number of the entry.

Status

This field displays whether the queue is active or not. A yellow bulb signifies that this queue is 
active. A gray bulb signifies that this queue is not active.

Name

This shows the descriptive name of this queue.

Interface

This shows the name of the AMG1302/AMG1202-TSeries’s interface through which traffic in this 
queue passes.

Priority

This shows the priority of this queue.

Weight

This shows the weight of this queue.